ADALIL Telecom & IT Technology

JDSU

 

Attenuator

 

JDSU OLA-55M
Smart Motorized Optical Level Attenuator

  • Attenuation range 2 – 60 dB
  • Absolute and relative attenuation setting
  • FTTx ready
  • Automatic stabilization of the output power even if the launched input fluctuates (level controller mode)
  • Direct setting of the output power (level controller mode)
  • Up and down arrow key to precise and fast manual setting
  • Remote controllable via USB



JDSU OLA-55M Series

http://www.testequipmentdepot.com/jdsu/pdf/ola-55m.pdf

 



JDSU Laser Source

JDSU OLS-34 
Smart Pocket 850/1300 nm, Multimode Optical Light Sources

  • Dedicated to LAN/WAN Access and Enterprise multimode networks with 850/1300 nm.
  • Rugged and pocket-sized design
  • Large display combined with an easy-to-use interface
  • Combines 2 wavelengths (850/1300 nm) in one unit
  • Fixed or interchangeable connectors for maximum flexibility
  • Auto-wavelength and TWINTest transmission modes
  • Micro USB interface for power supply
  • One output port for 2 wavelengths 3-years calibration period
  • Can be part of the SmartPocket Optical Test Kits
JDSU OLS-34 Series

http://www.testequipmentdepot.com/jdsu/pdf/ols3x.pdf

 



JDSU OLS-35 
Smart Pocket 1310/1550nm Single mode Optical Light Sources

  • Ideal for all standard Singlemode Telecommunication networks applications with 1300/1550 nm
  • Rugged and pocket-sized design
  • Large display combined with an easy-to-use interface
  • Combines 2 wavelengths (1310/1550 nm) in one unit
  • Fixed or interchangeable connectors for maximum flexibility
  • Auto-wavelength and TWINTest transmission modes
  • Micro USB interface for power supply
  • One output port for 2 wavelengths 3-years calibration period
  • Part of the SmartPocket Optical Test Kits
JDSU OLS-35 Series

http://www.testequipmentdepot.com/jdsu/pdf/ols3x.pdf



JDSU OLS-36 
Smart Pocket 850/1300/1310/1550nm, SM & MM  Optical Light Sources

  • Quad-wavelength solution covering both multimode and singlemode wavelengths in one product
  • Rugged and pocket-sized design
  • Large display combined with an easy-to-use interface
  • Combines 4 wavelengths (850/1300/1310/1550 nm) in one unit
  • Fixed or interchangeable connectors for maximum flexibility
  • Auto-wavelength and TWINTest transmission modes
  • Micro USB interface for power supply
  • One output port for 2 wavelengths 3-years calibration period
  • Can be part of the SmartPocket Optical Test Ki
JDSU OLS-36 Series

http://www.testequipmentdepot.com/jdsu/pdf/ols3x.pdf




JDSU OLS-6 
Pocket-sized dual wavelength light sources, 1310 and 1550 nm

  • Pocket class: Rugged, compact and lightweight
  • Easy-to-use, straight forward operation
  • Reliable basic functionality for most economical testing
  • Three year calibration period
  • OLS-6: dedicated for single mode at 1310 and 1550 nm
  • Standard AA batteries or NiMH/NiCd cells
  • FTTx read.
JDSU OLS-06 Series

http://www.testequipmentdepot.com/jdsu/pdf/ols-5-6.pdf



Optical Power Meters

JDSU OLP-34

Smart Pocket Optical Power Meters
for LAN/WAN Access & Enterprise multimode or single mode applications

  • Optimized for LAN/WAN Access and Enterprise multimode or single mode applications
  • Rugged and pocket-sized design
  • Large display combined with an easy-to-use interface
  • Auto-wavelength recognition function for saving test time and error-free testing
  • Internal data storage (100 results)
  • Report generation with OFS-355 software
  • Extra long battery lifetime (>200 hours)
  • 3-years calibration period
  • Universal optical interface for all 2.5 mm / 1.25 mm connector
  • Individually settable wavelengths per 1 nm step
  • Micro USB interface for power supply or data transfer
  • Part of the SmartPocket Optical Test Kits

JDSU OLP-3X Series

http://www.testequipmentdepot.com/jdsu/pdf/olp-3x_data.pdf




JDSU OLP-35
Smart Pocket Optical Power Meters

 

  • Covers all standard singlemode Telecommunication networks
  • Rugged and pocket-sized design
  • Large display combined with an easy-to-use interface
  • Auto-wavelength recognition function for saving test time and error-free testing
  • Internal data storage (100 results)
  • Report generation with OFS-355 software
  • Extra long battery lifetime (>200 hours)
  • 3-years calibration period
  • Universal optical interface for all 2.5 mm / 1.25 mm connector
  • Individually settable wavelengths per 1 nm step
  • Micro USB interface for power supply or data transfer
  • Part of the SmartPocket Optical Test Kits
JDSU OLP-35 Series InGaAs (+10 dBm)

http://www.testequipmentdepot.com/jdsu/pdf/olp-3x_data.pdf




 

DSU OLP-38 
Smart Pocket High power (+26dBm) Optical Power Meters

  • Higher power (+26dBm) version for any CATV (with Analog RF transmission), or amplified DWDM system applications
  • Rugged and pocket-sized design
  • Large display combined with an easy-to-use interface
  • Auto-wavelength recognition function for saving test time and error-free testing
  • Internal data storage (100 results)
  • Report generation with OFS-355 software
  • Extra long battery lifetime (>200 hours)
  • 3-years calibration period
  • Universal optical interface for all 2.5 mm / 1.25 mm connector
  • Individually settable wavelengths per 1 nm step
  • Micro USB interface for power supply or data transfer

.

JDSU OLP-38 Series

http://www.testequipmentdepot.com/jdsu/pdf/olp-3x_data.pdf



 

 

JDSU OLP-55
Smart Optical Power Meter
  • Industry’s first auto-zeroing function provides outstanding accuracy with no manual zeroing necessary. The OLP-55 offers the highest accuracy on the market.
  • Auto-lambda function provides automatic wavelength detection to speed up testing and avoid instrument setting failures.
  • TWINtest and new TrIPLetest allows for simultaneous testing at multiple wavelengths.
  • reflection trap reduces multiple reflections between adapter and photo diode for increased accuracy (adapter BN 2014/00.xx).
  • FTTx ready
  • Visual fault locator option at 635 nm
  • economical option for fiber tracing, routing, and continuity checking
  • Universal push-pull adapter 2.5 mm (1.25 mm adapter optional)
  • Host USB data storage option
  • Unlimited result storage capacity via USB memory sticks
  • easy and quick data transfer of stored measurement results
JDSU OLP-55 Series

http://www.testequipmentdepot.com/jdsu/pdf/olp-55.pdf



 



JDSU OLP-57
FFTx/PON Selective Optical Power Meter
  • The market’s first BPON/EPON/GPON optical power meter
  • Selective FTTX power meter with through mode, measuring at all three wavelengths 1490 nm, 1550 nm and 1310 nm in an FTTX/PON system simultaneously.
  • Easy pass/fail analysis via multiple-user adjustable thresholds per wavelength. Ten pre-defined, user-adjustable sets are provided.
  • Illuminated graphical user interface (GUI) displays all necessary parameters and up to three test results simultaneously.
  • Data transfer via USB interface.
  • Burst mode function for 1310 nm upstream.
  • Visual fault locator option at 635 nm
  • Economical option for fiber tracing, routing, and continuity checking
  • Universal push-pull adapter 2.5 mm (1.25 mm adapter optional)
  • Host USB data storage option
  • Unlimited result storage capacity via USB memory sticks
  • easy and quick data transfer of stored measurement results

JDSU OLP 57

http://www.testequipmentdepot.com/jdsu/pdf/olp-57.pdf




JDSU OLP-5  Pocket sized Optical Power Datacom Meter, -60 + 5 dBm, Discontinued
  • Pocket class: Rugged, compact and lightweight
  • Easy-to-use, straight forward operation
  • Reliable basic functionality for most economical testing
  • Three year calibration period
  • Dedicated for all single mode and multi-mode applications like LAN, Telecom, CATV, and DWDM testing
  • Universal push pull interface (2.5 or 1.25 mm)
  • Twin test and Auto-λ
  • Compact design, versatile use
  • Standard AA batteries or NiMH/NiCd cells




JDSU OLP-5 Series

http://www.testequipmentdepot.com/jdsu/pdf/olp-5-6-8.pdf



JDSU Fiber Identification Tools & Locator

JDSU FI-11
Fiber Identifier

  • Hand-held, lightweight, rugged, battery-powered
  • Interchangeable adapter heads for: jacketed, coated or ribbon fiber
  • Complete with carrying case
  • Attaches to belt or tool pouch
  • Operates with one hand
  • Operates from 800 nm to 1700 nm
  • Compatible with most AT&T and Corning optical fiber
  • Uses non-destructive macro-bending technology
  • Bidirectional traffic indication
  • High intensity LED indication of active signal transmission
  • Detects presence of 270 Hz, 1000 Hz and 2000 Hz modulated tones
  • Low-battery indication



JDSU Fi-11 Series

http://www.testequipmentdepot.com/jdsu/pdf/fi-11_data.pdf





JDSU FFL-050
Pocket-sized Visual Fault Locator
  • Compact, ergonomic design for ultimate portability
  • Visible wavelength is 650 nm
  • High powered laser (1 mW) for single-mode (> 7 km) and multi-mode (> 5 km) connectors
  • Continuous or Flash illumination
  • Universal connector interface for quick and easy connection
  • 2.5 mm connector input (1.25 mm adapter available)
  • Includes soft-sided carrying case with belt loop
  • Uses two AAA batteries (included) with 30+ hours continuous power
  • Universal 1.25 mm adapter sold separately




JDSU FFL-050


 


JDSU FI-60
Live Fiber Identifier

  • Avoid network downtime and damage with repeatable SafeChek `easy-pull trigger system.
  • Get the job done faster with a single LFI head that is compatible with multiple cable diameters (250μm to 3mm jacketed fibers).
  • Increase reliability and avoid false readings with integrated ambient light shield.
  • Have twice the tool at half the price! The FI-60 LFI easily converts to a full-function OPM that stores, recalls, and exports results to a PC via USB.
  • Applications
  • Key Features
  • Easily detect the optical signal without having to disconnect the fiber.
  • Installation, service, maintenance, or troubleshooting
  • Integrate with FiberChek2 for combined inspection and test reporting.
  • SafeChek easy-pull trigger system ensures repeatable engagement with fiber cable
  • LFI head accepts multiple cable diameters (250μm to 3mm jacketed fibers
  • Durable metal input adapters (2.5 and 1.25mm) for OPM
  • Measure both absolute (dBm) and relative (dB) power
  • Store and recall up to 100 OPM readingsJDSU FI-60

http://www.testequipmentdepot.com/jdsu/pdf/fi-60_data.pdf


 

 

JDSU OVF-1
"Pocket sized" Visual Fault Locator
  • Rugged metal housing, pen-size format
  • Lightweight
  • Universal push-pull interfaces (UPP) for 2.5 mm and 1.25 mm
  • Visible laser light at 635 nm
  • Usable with single-mode and multimode fibers
  • Range >5 km
  • CW and blink modes
  • Long battery life (>40 hours)
JDSU OVF-1 Series

http://www.testequipmentdepot.com/jdsu/pdf/ovf-1.pdf




JDSU FFL-100
Ruggedized Visual Fault Locator
  • Compact, ergonomic design for ultimate portability
  • Visible wavelength is 650 nm
  • High powered laser (1 mW) for single-mode (> 7 km) and multi-mode (> 5 km) connectors
  • Continuous or Flash illumination
  • Universal connector interface for quick and easy connection
  • 2.5 mm connector input (1.25 mm adapter available)
  • Includes soft-sided carrying case with belt loop
  • Uses two AA batteries (included) with 80+ hours continuous power
  • Professional-grade with universal 1.25 mm adapter included




JDSU FFL100

http://www.testequipmentdepot.com/jdsu/pdf/ffl.pdf




JDSU Laser Sources

JDSU OLS-55 & OLS-56
Smart Optical Laser Source
  • Laser source with up to four wavelengths offers flexibility in singlemode and multimode applications
  • Adjustable output power level
  • Unique power supply management system on the market with 4-way powering
  • Quick start operation, requiring no warm-up time and reducing testing time
  • Illumated graphical display which shows up to 3 measurements simultaneously
  • Large storage capability up to 1000 results with automatic date/time stamp
  • Output level adjustment ensures correct power for individual applications
  • Communication with JDSU power meters for auto-lambda, TWINtest, and TRIPLEtest functions
  • High output level stability due to built-in optical isolator and optical power control
  • FTTx ready
  • Visual fault locator option at 635 nm
    • Economical option for fiber tracing, routing, and continuity checking
    • Universal push-pull adapter 2.5 mm (1.25 mm adapter optional)
  • USB port for remote operation as well as easy report generation and analysis
  • Robust, shock-proof, and splash-proof design for field operation
  • One-handed operation in the field
  • Applications
  • Testing for all of the industry's newest applications including FTTx/PON, DWDM, CWDM, 40 Gbps, Ethernet, and Gigabit Ethernet
  • The OLS-55 and OLS-56 SMART Optical Laser Sources offer greater flexibility and higher accuracy for installing and maintaining multimode datacom networks and LANs as well as for maintaining and repairing singlemode fibers in communication, telecommunications, and CATV-multimedia networks


JDSU OLS-55

http://www.testequipmentdepot.com/jdsu/pdf/ols-55-56.pdf




JDSU Fiber Optic Adapters

JDSU 2014 Series
Fiber Optic Test Adapters with reflection Trap
  • Laser source with up to four wavelengths offers flexibility in singlemode and multimode applications
  • Adjustable output power level
  • Unique power supply management system on the market with 4-way powering
  • Quick start operation, requiring no warm-up time and reducing testing time
  • Illumated graphical display which shows up to 3 measurements simultaneously
  • Large storage capability up to 1000 results with automatic date/time stamp
  • Output level adjustment ensures correct power for individual applications
  • Communication with JDSU power meters for auto-lambda, TWINtest, and TRIPLEtest functions
  • High output level stability due to built-in optical isolator and optical power control
  • FTTx ready
  • Visual fault locator option at 635 nm
  • Economical option for fiber tracing, routing, and continuity checking
  • Universal push-pull adapter 2.5 mm (1.25 mm adapter optional)
  • USB port for remote operation as well as easy report generation and analysis
  • Robust, shock-proof, and splash-proof design for field operation
  • One-handed operation in the field
JDSU 2014 Series

http://www.testequipmentdepot.com/jdsu/pdf/adapters.pdf




JDSU 2150 Series
Fiber Optic
Test Universal Adapters
  • A Complete range of adapters and cables suitable for all JDSU products with optical interfaces
  • Ready for all common 2.5 and 1.25mm connectors
  • Accurate power measurements with built-in reflection trap






JDSU 2150 Series

http://www.testequipmentdepot.com/jdsu/pdf/adapters.pdf





JDSU SMART Optical Loss Test Sets

JDSU OLT-55
Smart Optical Loss Test Set

  • Industry’s first auto-zeroing function provides outstanding accuracy even for high loss measurements with no manual zeroing necessary.
  • Auto-lambda function with TWINtest and new TRIPLEtest provides automatic wavelength detection to speed up testing. Up to three different wavelengths are measured and displayed simultaneously.
  • Reflection trap at the power meter’s input reduces multiple reflections between adapter and photo diode, allowing for increased accuracy (adapter BN 2014/00.xx)
  • Laser source with output level adjustment to ensure correct power for individual applications
  • Client USB interface for easy remote control and report generation.
  • Visual fault locator option at 635 nm
    • Economical option for fiber tracing, routing, and continuity checking
    • Universal push-pull adapter 2.5 mm (1.25 mm adapter optional)
    • Host USB data storage option
      • Unlimited result storage capacity via USB memory sticks
      • Easy and quick data transfer of stored measurement results

 

JDSU OLT-55 Series

http://www.testequipmentdepot.com/jdsu/pdf/olt-55.pdf



JDSU ORL-55
Smart Optical Loss Test Set


  • High-precision ORL testing at 2 or 3 wavelengths (singlemode 1310, 1490, 1550, 1625 nm)
  • Three instruments in one: return loss meter/power meter/laser source
  • TRIPLEtest function for simultaneous measurements at three wavelengths in real time
  • Auto-zeroing function (patent pending) for increased measurement accuracy
  • Internal data storage and PC software enables efficient documentation and accurate reporting
  • Built-in real-time clock
  • Visual fault locator option at 635 nm
    • Economical option for fiber tracing, routing, and continuity checking
    • Universal push-pull adapter 2.5 mm (1.25 mm adapter optional)
  • Host USB data storage option
    • Unlimited result storage capacity via USB memory sticks
    • Easy and quick data transfer of stored measurement results
JDSU ORL-55 Series

http://www.testequipmentdepot.com/jdsu/pdf/orl-55.pdf




Fiber Test Tools


Fiber Complete™ Integrated Loss, ORL and OTDR Modules – 4100-Series for T-BERD®/MTS-2000, -4000 Platforms



Automatic bi-directional IL, ORL and OTDR test solution for use in the installation, turn-up, and maintenance of FTTx/PON, Access and Metro Networks. JDSU 4100-Series Fiber Complete family is the first solution to allow performing automatically bi-directional Insertion Loss (IL), bi-directional Optical Return Loss (ORL using OCWR method), distance and Bi-directional OTDR or Fault Finder, using one fiber connection with one button-push operation.

This is the only bi-directional loss test set on the market that can characterize splices and connectors, and locate faults.

http://www.jdsu.com/ProductLiterature/fibercomplete_ds_fop_tm_ae.pdf



MTS-2000 Handheld Modular Test Set



http://www.jdsu.com/ProductLiterature/t-berd-mts-2000-ds-fop-tm-ae.pdf

MTS-4000 Multiple Services Test Platform


http://www.jdsu.com/ProductLiterature/tbmts4000_ds_fop_tm_ae.pdf



OTDR Modules – 4100-Series for T-BERD®/MTS-2000, -4000 Platforms


  • Up to 42 dB dynamic range and 256,000 acquisition points
  • PON optimized to test through up to a 1x128 splitter
  • Combined singlemode/multimode version
  • Single-/Dual-/Tri-wavelength versions with 1310,1490,1550,1625, and 1650nm
  • Single connector port for 1310, 1550 and in-service 1625 or 1650nm wavelengths
  • Integrated light source and power meter on OTDR port
  • Available in FiberComplete version for automated bi-directional OTDR, IL and ORL measurements

http://www.jdsu.com/ProductLiterature/otdr20004000-ds-fop-tm-ae.pdf


T-BERD® 2000 Handheld Modular Test Set


http://www.jdsu.com/ProductLiterature/t-berd-mts-2000-ds-fop-tm-ae.pdf



T-BERD® 4000 Multiple Services Test Platform


http://www.jdsu.com/ProductLiterature/tbmts4000_ds_fop_tm_ae.pdf



CWDM OTDR Modules – 8100-Series for T-BERD®/MTS-6000A, -8000 Platforms

  • The CWDM OTDR solution helps cable operators, dark fiber providers and telecommunication service providers to characterize, maintain and troubleshoot CWDM fiber networks.
  • The CWDM solution complements the existing range of OTDR modules within the T-BERD/MTS family and further enables user to rapidly, reliably and cost-effectively deploy network services in one convenient package
  • First CWDM OTDR solution in the market
  • Flexible solution: make the number of wavelengths evolve with your system
  • Test through CWDM system multiplexers and demultiplexers
  • In-service testing capability
  • Compatible with MTS-8000 / T-BERD 8000, MTS-6000 / T-BERD 6000
  • Short- and medium-haul CWDM network applications
  • Fiber characterization
  • Wavelength provisioning
  • In-service troubleshooting

http://www.jdsu.com/ProductLiterature/cwdmotdr_ds_fop_tm_ae.pdf



OTDR Modules – 8100-Series for T-BERD®/MTS-6000A, -8000 Platforms


  • OTDR test solution for use in the installation, turn-up, and maintenance of Entreprise, FTTx, Access, Metro, very long haul and ultra long haul networks
  • Industry leading dead zone performance which allows full characterization of element events on a fiber link 2 meters apart (EVO family)
  • Combines OTDR, power meter and continuous light source for added testing flexibility (EVO family)
  • Avoids the risk of live signal interference or damage to the optical transmitter when performing an OTDR test with instantaneous automatic traffic detection
  • Single-/Dual-/Tri-wavelength versions with 1310, 1383, 1490,1550,1625, and 1650nm
  • Single connector port for 1310, 1550 and in-service1650nm wavelength
  • Available in FiberComplete version for automated bi-directional OTDR, IL and ORL measurements

http://www.jdsu.com/ProductLiterature/8100otdr_ds_fop_tm_ae.pdf



Fiber Complete™ Integrated Loss, ORL and OTDR Modules – 8100-Series for T-BERD®/6000A, -8000 Platforms



  • Automatic bi-directional IL, ORL and OTDR test solution for use in the installation, turn-up, and maintenance of FTTx/PON, Access and Metro and Long Haul Networks.
  • JDSU 8100-Series FiberComplete EVO family offers the first solution of its kind that performs all the fundamental fiber qualification tests such a bi-directional insertion loss (IL), optical return loss (ORL) and OTDR with one module and from one optical port.
  • Installation and commissioning of Access, Metro and Very Long Haul networks
  • FTTH/PON network construction and acceptance testing
  • Fiber link troubleshooting with FaultFinder mode
  • Acceptance testing with Bidirectional OTDR mode

http://www.jdsu.com/ProductLiterature/8100fibercomplete_ds_fop_tm_ae.pdf



Smart OTDR™ Testing Solution


  • Characterize point-to-point access fiber
  • Qualify FTTH feeder and drop cables
  • Troubleshoot FTTA front haul
  • Install and maintain inter-building single-mode Enterprise networks
  • Two versions available: Single-wavelength with 1550 nm and dual-wavelength with 1310 and 1550 nm
  • 35/33 dB dynamic range at 1310/1550 nm
  • Integrated CW light source on OTDR port
  • Built-in optical power meter and VFL options
  • Large 5-inch touch screen display
  • Special hands-free bag comes standard

http://www.jdsu.com/ProductLiterature/smartotdr-ds-fop-tm-ae.pdf


 


SONET/SDH


SDH Products

JDSU offers SONET/SDH test and troubleshooting solutions up to 40/43 G that verify network element conformance and connectivity and measure BERs to ensure QoS. JDSU testers can verify end-to-end connectivity, measure BER, and determine whether throughput, utilization, frame loss, packet jitter, wander, and round-trip delay (RTD) characteristics meet service level agreements.


40G SONET/SDH Module for T-BERD®/MTS-8000 Platforms

  • SONET/SDH fiber characterization, service verification, and troubleshooting with ITU-T and GR-253-compliant optics, optical power measurement, and frequency offset adjustment and measurement.
  • Full 40 G testing (OC-768/STM-256)
  • 1550 nm optics (per ITU-T and GR-253 standards)
  • G.826 and G.828 performance measurements
  • Integrated touch screen and easy-to-use graphical user interface (GUI)
  • Extensive error/alarm generation and analysis
  • Internal, external, and recovered timing modes

http://www.jdsu.com/ProductLiterature/40gpromo_ss_tfs_tm_ae.pdf



Transport Module for T-BERD®/MTS-8000 Platforms



Combines traditional SONET/SDH and Ethernet/IP features in a single module including advanced Layer 4 and above application-centric testing, IPTV, and Fibre Channel to 10 Gbps.
The Transport module for the T-BERD/MTS-8000 Platforms enables service providers to rapidly, reliably and cost-effectively deploy Transmission services in one convenient package. An important complement to the existing T-BERD/MTS-8000 platforms product line, the module supports T1-10 G SDH/SONET, 10/100/Gig Ethernet, 10Gig Ethernet LAN/WAN PHY, IP, Fibre Channel and OTN testing in the industry's most innovative test module.
Ethernet
- 10GigE LAN/WAN and 1 GigE optical interfaces
- 10/100/1000 Mb/s electrical Ethernet interfaces 1550 nm, 1310 nm and 850 nm wavelength capable
- Single and Dual Port configurations for 1GigE, 100M, and 10M Ethernet interfaces
- Test End to end data connectivity and loopback testing RFC 2544 Conformance Testing; Quality of Service measurements
- Verify the integrity of triple play services such as Video and VoIP by qualifying QoS metrics such as Packet Jitter and Round Trip Delay.
- Test IP Traffic, including Connectivity, Throughput and Qos Measurements
- Transmit and Receive Encapsulated traffic using MPLS/VPLS/VLAN and Q in Q technologies
- Support the simultaneous analysis of up to 8 Ethernet/IP streams for Class of Service testing
- Graphical Display Results such as Delay, Throughput, and Jitter versus Time
SDH/SONET
- SDH/SONET testing at 51 Mbps, 155 Mbps, 622 Mbps, 2.5 Gbps, and 10 Gbps
- T-carrier testing at T1, E1, E3, DS3 and E4 rates
- Support Single and Dual Port configurations for 2.7G to 155M optical technologies
- Muxed payload and concatenated payload generation and analysis from 10 Gb/s to 1.5/2 Mbps
- 1550 nm and 1310 nm wavelength support for all optical interfaces
- SDH/SONET overhead byte manipulation and viewing for High and Low Paths
- Round Trip Delay measurements to test latency
- Service Disruption measurements to verify protection switching facilities
- Performance measures including T1.510, T1.514, G.821, G.826, G.828, G.829, M.2100, and M.2101 for circuit acceptance
- Dual-Direction T1, E1, DS3 and STS-1 receivers reduces test times by 50%
Fibre Channel
- Supports Fibre channel (1G/2G) optical interfaces for 850 nm, 1310 nm, and 1550 nm Tx/Rx
- Single and Dual Port capable
- Support Layers 1 and Layer 2 BER testing through the use of industry specified test patterns (example: High Frequency Pattern (HFPAT), Low Frequency Pattern (LFPAT))
- Transmit and Receive Fibre Channel Frames up to 100% of line rate to test connectivity
- Verify QoS measurements and errors such as Delay (us), Symbol Errors, CRC Errored Frames, Fibre Runts, Fibre Jabbers, Undersized Frames and Lost Frames


OTN
- Support OTU2 (10.7G, 11.05G, 11.1G) and OTU1 (2.7G) technologies
- 1550 nm and 1310 nm Tx/Rx for all interfaces
- Simultaneously and independently test 10.7G or 11.1G and 2.7G OTN interfaces
- Analyze and generate OTU, ODU and OPU overhead, errors and alarms
- Support correctable and uncorrectable FEC error analysis and generation
- Transmit, Receive and Analyze TCM 1-6 overhead fields
- For 10.7G/2.7G technologies support SDH/SONET framing with a PRBS client for BER testing
- For 11.05 and 11.1G OTN technologies, support a PRBS client for BER testing
Optical (with the User Interface Module)

- Insertion Loss Testing with the Optical Power Meter and Source


- Fiber Optic cable verification with the Visual Fault Locator
- Fiber Optic connector verification with the Fiber Optic Microscope

http://www.jdsu.com/ProductLiterature/tbmts8000_ds_tfs_tm_ae.pdf




40G SONET/SDH Module for T-BERD®/MTS-8000 Platforms


Highlights

  • Full 40 G testing (OC-768/STM-256)
  • 1550 nm optics (per ITU-T and GR-253 standards)
  • G.826 and G.828 performance measurements
  • Integrated touch screen and easy-to-use graphical user interface (GUI)
  • Extensive error/alarm generation and analysis
  • Internal, external, and recovered timing modes
  • Synchronous optical network technologies/synchronous digital hierarchy (SONET/SDH) overhead generation and analysis
  • Internal, external, and recovered timing modes
  • Pointer generation and analysis
  • Optical power measurement (OPM)
  • Frequency offset adjustment and measurement

Applications

http://www.jdsu.com/ProductLiterature/40gpromo_ss_tfs_tm_ae.pdf




Transport Module for T-BERD®/MTS-8000 Platforms




Highlights

  • Combines traditional SONET/SDH and Ethernet/IP features in a single module including advanced Layer 4 and above application-centric testing, IPTV, and Fibre Channel to 10 Gbps
  • Truly field tailored, the only integrated Ethernet, SDH/SONET, IP, Fibre Channel, OTN and PDH test solution available to the market, weighing under 7 kgs.
  • Battery operation up to 2 hours at 10 Gbps rates.
  • Practically unlimited field modularity: you can match any requirement for test function, size, weight, or price.
  • Reduce test times by up to 66% by testing up to 3 circuits simultaneously and independently.

Applications

  • Verify end to end network connectivity, throughput, and quality of service for all technologies.
  • Measure network and circuit performance with an array of Error and Alarm insertion and analysis capability.
  • Perform SLA and circuit acceptance routines via a variety of industry test standards.
  • Test Quality of Service metrics by verifying results such as Jitter, Delay, Service Disruption, Lost and Out of Sequence frames.


http://www.jdsu.com/ProductLiterature/tbmts8000_ds_tfs_tm_ae.pdf





Applications

  • Tests and troubleshoots converged Ethernet/IP networks at 10 Mbps to 10 Gpbs interfaces and captures and analyzes packets
  • Tests Layer 1-3 Ethernet/IP SLAs with an auto¬mated, enhanced RFC 2544/SAMComplete per ITU-T Y.1564
  • Tests TDM/PDH to SONET/SDH at OC-3/STM-1 to OC-192/STM-64, including service disruption measurements and path overhead (POH) capture with triggers
  • Enables installation and maintenance of OTN networks up to 11.1 Gbps interface with ODU-0 support for Ethernet/IP client interfaces
  • Supports 8G FC dual-port interfaces (along with 1/2/4/10 Gbps) for installation and maintenance of SANs and low-latency circuits


http://www.jdsu.com/ProductLiterature/msamv2_pb_tfs_tm_ae.pdf




ONT 40/43G


Highlights

  • Industry-first one-box 40/43 G jitter/wander solution with the widest input optical power range of –9 to +3 dBm for accurate jitter measurement, even in production environments that require large power margins
  • Tx eye-diagram trigger-out on the digital module and Rx eye-diagram trigger-out on the jitter module eliminate the need for a clock-recovery module to perform eye-diagram measurements
  • Future-proof with ODU0 and ODUflex support
  • Design and verification of network equipment
  • Evaluate network performance
  • Troubleshoot network issues
  • Evaluate 40/43 G transponder BER and jitter performance
  • Conduct production testing with automation control


Applications

http://www.jdsu.com/ProductLiterature/ont-5xx_40-43G_ds_opt_tm_ae.pdf




ONT Ethernet

Addresses the need for evaluating fully interworking New Generation SONET/SDH with Ethernet services at electrical and optical interfaces

http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/ont-ethernet.aspx



ONT Optical Network Tester Family

Highly configurable, multi-application and multi-port platform for system verification and acceptance testing.http://www.jdsu.com/ProductLiterature/ont600_ds_opt_tm_ae.pdf




ONT G.709 OTN

Provides full functionality for system verification of G.709 and G.sup43 equipment, including extensive FEC testing.http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/ont-g709.aspx


ONT Jitter/Wander Measurement for SyncE, OTN, and SONET/SDH

Generates and analyzes jitter/wander measurements of 155 M to 10 G SONET/SDH, 2.7 G and 10.7/11.1 G OTN (G.709), GE, and 10 GE signals to ITU-T jitter/wander standards O.172/O.173/O.174.

http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/ont-jitter.aspx





ONT Multi-Channel

In combination with ONT 2.5G and 10G, allows generation and analysis of up to 1,000 simultaneous VC-12/VT1.5 channels in 2.5 and 10 Gbps signals.http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/ont-multi.aspx



ONT NewGen EoS

The industry's first fully functional Ethernet over SONET/SDH test solution, including Virtual Concatenation with LCAS emulation, Generic Frame Procedure, and Ethernet MAC frames.

http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/ont-newgen.aspx


XDSL


  • Triple-Play Services Test

JDSU offers a complete range of testers for triple-play services turn-up, troubleshooting, and maintenance over leading-edge fiber- and copper-based digital subscriber line (DSL) Access networks. JDSU testers enable the efficient delivery of bundled voice-over-IP (VoIP), video (IPTV and HDTV), and IP data to the exacting demands of customers—delivering on both quality of service (QoS) and experience (QoE), while reducing operating expenses.



Narrowband and Wideband Copper Test

JDSU copper test solutions help maximize revenue while simultaneously ensuring high customer quality of experience (QoE). ADSL2+ and VDSL2 deployments demand more from the existing copper infrastructure and JDSU testers help even less experienced field engineers meet the challenge. JDSU offers a full complement of testers for voice, video, and data that turn up new services and quickly resolve trouble tickets in the home and throughout even the most demanding and advanced copper infrastructures.

Copper Services Module for the T-BERD®/MTS-4000 Multiple Services Test Platform

Module for comprehensive copper installation, testing and maintenance up to full-spectrum 30 MHz VDSL for FTTx and Access networks. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/4000copper.aspx

Infineon Module and Dr. DSL® Software Option for the T-BERD®/MTS-4000 Multiple Services Test Platform

Optional Infineon Technologies chipset and licensed option for Dr. DSL diagnostic solutions from Aware, Inc. for testing high bit-rate triple-play services, including HDTV and IPTV. http://www.jdsu.com/ProductLiterature/4000infineon_ss_tfs_tm_ae.pdf

HST-3000 Handheld Services Tester

Premier triple –play access network tester installs and maintains copper and fiber based bonded ADSL/VDSL, IPTV, Microsoft TV, VoIP and data plus legacy networks. http://www.jdsu.com/ProductLiterature/hst_bro_0608.pdf

MTS-4000 Multiple Services Test Platform

Modular handheld test solution for all-in-one Access/FTTx network and triple-play services installation and maintenance. http://www.jdsu.com/ProductLiterature/tbmts4000_ds_fop_tm_ae.pdf

SmartClass Triple Play Services (TPS)

All-in-one tool for broadband services installation, including copper, ADSL 1/2/2+, IP data, VoIP, and IP video testing. http://www.jdsu.com/ProductLiterature/smclasstpsVDSL_ds_tfs_tm_ae.pdf

T-BERD® 4000 Multiple Services Test Platform

Modular handheld test solution for all-in-one Access/FTTx network and triple-play services installation and maintenance. http://www.jdsu.com/ProductLiterature/tbmts4000_ds_fop_tm_ae.pdf

UltraFED™ IIB

Enables technicians to install and troubleshoot copper-based single pair and bonded pair VDSL2 and ADSL2+ circuits the right-way -- dual ended with UltraFED IIB. http://www.jdsu.com/ProductLiterature/ultrafedllb-ds-tfs-tm-ae.pdf

SmartClass Home v3 Inside Wiring and Networks Service Meter

Handheld service meter for high- speed ADSL-VDSL2 and HPNA networks as well as internal wiring at the customer premises for voice, video, and data services. http://www.jdsu.com/ProductLiterature/smclasshfull_ds_cab_tm_ae.pdf

TechComplete for the HST-3000 Handheld Services Tester

WorkFlow automation software for the JDSU HST-3000 Handheld Services Tester. http://www.jdsu.com/ProductLiterature/techcomplete-hst3000-pb-acc-tm-ae.pdf

StrataSync™

StrataSync is a hosted, cloud-based solution that provides asset, configuration, and test data management for JDSU instruments and ensures all instruments have the latest software and options installed. http://www.jdsu.com/ProductLiterature/stratasync_pb_tfs_tm_ae.pdf









  • IP Video Test & Monitoring

JDSU IP Video Test & Monitoring solutions enable analysis of the video service (IPTV) stream anywhere in the in the transport network via a GigE interface, in Access networks using a DSL interface, or within the Customer Premise. With  advanced performance monitoring features, JDSU test solutions accurately measure video QoS and QoE for content, transport, transaction and real customer experience. Most of the portfolio supports the MicroSoft Mediaroom IPTV platform.

Triple-Play Services Software Option for the T-BERD®/MTS-4000 Multiple Services Test Platform

Module for comprehensive IP service-level testing (voice, video, data) for FTTx, Access and Home network turn-up, troubleshooting, and maintenance. http://www.jdsu.com/ProductLiterature/4000tps_ds_tfs_tm_ae.pdf

HST-3000 Handheld Services Tester

Premier triple –play access network tester installs and maintains copper and fiber based bonded ADSL/VDSL, IPTV, Microsoft TV, VoIP and data plus legacy networks. http://www.jdsu.com/ProductLiterature/hst_bro_0608.pdf

MTS-4000 Multiple Services Test Platform

Modular handheld test solution for all-in-one Access/FTTx network and triple-play services installation and maintenance. http://www.jdsu.com/ProductLiterature/tbmts4000_ds_fop_tm_ae.pdf

PathTrak Video Monitoring System

For QAM and Analog RF testing, including MER, BER, and level; provides remote analysis of CATV forward path systems. http://www.jdsu.com/ProductLiterature/pvmsystem_br_cab_tm_ae.pdf

Home Performance Management

Enables multi-play service providers to gain visibility into their customers’ quality of experience as seen at the home. http://www.jdsu.com/ProductLiterature/Home-Performance-Management.pdf

SmartClass Triple Play Services (TPS)

All-in-one tool for broadband services installation, including copper, ADSL 1/2/2+, IP data, VoIP, and IP video testing. http://www.jdsu.com/ProductLiterature/smclasstpsVDSL_ds_tfs_tm_ae.pdf

T-BERD® 4000 Multiple Services Test Platform

Modular handheld test solution for all-in-one Access/FTTx network and triple-play services installation and maintenance. http://www.jdsu.com/ProductLiterature/tbmts4000_ds_fop_tm_ae.pdf

Triple Play Analyzer

Monitor and troubleshoot the performance of IPTV, VoD, VoIP and broadband data applications with Triple Play Analyzer — now integrated with PacketPortal™. http://www.jdsu.com/ProductLiterature/tpa-to_ds_nsd_tm_ae.pdf

TechComplete for the HST-3000 Handheld Services Tester

WorkFlow automation software for the JDSU HST-3000 Handheld Services Tester. http://www.jdsu.com/ProductLiterature/techcomplete-hst3000-pb-acc-tm-ae.pdf

StrataSync™

StrataSync is a hosted, cloud-based solution that provides asset, configuration, and test data management for JDSU instruments and ensures all instruments have the latest software and options installed. http://www.jdsu.com/ProductLiterature/stratasync_pb_tfs_tm_ae.pdf


  • VoIP Test

JDSU VoIP test solutions provide the ability to turn up, troubleshoot and monitor VoIP services.  Voice quality is tested using IP ping, packet statistics, and trace route analysis to identify, diagnose, and sectionalize VoIP network and equipment problems.  Users are able to verify the associated Mean Opinion Score (MOS) value and JDSU provides a wide range of signaling protocols, including SIP, H.323, MGCP, SCCP, and voice decoding (G.711, G.722, G.723, G.726, and G.729).

Triple-Play Services Software Option for the T-BERD®/MTS-4000 Multiple Services Test Platform

Module for comprehensive IP service-level testing (voice, video, data) for FTTx, Access and Home network turn-up, troubleshooting, and maintenance. http://www.jdsu.com/ProductLiterature/4000tps_ds_tfs_tm_ae.pdf

HST-3000 Handheld Services Tester

Premier triple –play access network tester installs and maintains copper and fiber based bonded ADSL/VDSL, IPTV, Microsoft TV, VoIP and data plus legacy networks. http://www.jdsu.com/ProductLiterature/hst_bro_0608.pdf

MTS-4000 Multiple Services Test Platform

Modular handheld test solution for all-in-one Access/FTTx network and triple-play services installation and maintenance. http://www.jdsu.com/ProductLiterature/tbmts4000_ds_fop_tm_ae.pdf

PVA-1000 VoIP Network Analysis Suite

VoIP/IMS analysis software and remote software capture agents. http://www.jdsu.com/ProductLiterature/pva1000voip_ds_sas_tm_ae.pdf

Home Performance Management

Enables multi-play service providers to gain visibility into their customers’ quality of experience as seen at the home. http://www.jdsu.com/ProductLiterature/Home-Performance-Management.pdf

SmartClass Triple Play Services (TPS)

All-in-one tool for broadband services installation, including copper, ADSL 1/2/2+, IP data, VoIP, and IP video testing. http://www.jdsu.com/ProductLiterature/smclasstpsVDSL_ds_tfs_tm_ae.pdf

T-BERD® 4000 Multiple Services Test Platform

Modular handheld test solution for all-in-one Access/FTTx network and triple-play services installation and maintenance. http://www.jdsu.com/ProductLiterature/tbmts4000_ds_fop_tm_ae.pdf

Triple Play Analyzer

Monitor and troubleshoot the performance of IPTV, VoD, VoIP and broadband data applications with Triple Play Analyzer — now integrated with PacketPortal™. http://www.jdsu.com/ProductLiterature/tpa-to_ds_nsd_tm_ae.pdf

SMART for IMS (J7844A)

High-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization. Specific benefits for IMS include advanced decodes, powerful call traces and efficient signaling analysis. http://www.jdsu.com/ProductLiterature/siganfam_br_nsd_tm_ae.pdf

TechComplete for the HST-3000 Handheld Services Tester

WorkFlow automation software for the JDSU HST-3000 Handheld Services Tester. http://www.jdsu.com/ProductLiterature/techcomplete-hst3000-pb-acc-tm-ae.pdf


 

  • E-Carrier Test

JDSU testers enable service providers to rapidly, reliably and cost-effectively deploy E-carrier services at T1, E1, E3, DS3, and E4 rates.

HST-3000 Handheld Services Tester

Premier triple –play access network tester installs and maintains copper and fiber based bonded ADSL/VDSL, IPTV, Microsoft TV, VoIP and data plus legacy networks. http://www.jdsu.com/ProductLiterature/hst_bro_0608.pdf

SmartClass E1/Datacom Tester

Handheld field tester for installing and commissioning E1 and Datacom service; offers multiple test modes for E1 and Datacom signal analysis. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/smartclass-e1.aspx

StrataSync™

StrataSync is a hosted, cloud-based solution that provides asset, configuration, and test data management for JDSU instruments and ensures all instruments have the latest software and options installed. http://www.jdsu.com/ProductLiterature/stratasync_pb_tfs_tm_ae.pdf



Ethernet/Fibre Channel


Triple-Play Services Test

JDSU offers powerful test platforms for the installation and maintenance of carrier-grade Ethernet and IP services and also enables transport technicians to quickly turn up and maintain Metro Core networks. JDSU testers can verify end-to-end connectivity, measure BER, and determine whether throughput, utilization, frame loss, packet jitter, and round-trip delay (RTD) characteristics meet SLA agreements. JDSU also offers the verification of video service deployment and quality of service (QoS) assurance in transport networks.


HST-3000 Handheld Services Tester

Premier triple –play access network tester installs and maintains copper and fiber based bonded ADSL/VDSL, IPTV, Microsoft TV, VoIP and data plus legacy networks. http://www.jdsu.com/ProductLiterature/hst_bro_0608.pdf

Transport Module for T-BERD®/MTS-8000 Platforms

Combines traditional SONET/SDH and Ethernet/IP features in a single module including advanced Layer 4 and above application-centric testing, IPTV, and Fibre Channel to 10 Gbps. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/mts-8000transport.aspx

Multi Services Application Module (MSAM) forT-BERD®/MTS-6000A/8000 Platform

Industry’s most compact 10 GigE multifunction tester for the installation and maintenance of carrier-grade Ethernet and Internet Protocol services. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/multi-services-application-module-for-t-berd-mts-6000a-platform.aspx

SmartClass OCC-55/-56 Optical Channel Checkers

Compact, low-cost test solution for installation, maintenance, and upgrades of CWDM & DWDM networks. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/occ-55.aspx

SmartClass Triple Play Services (TPS)

All-in-one tool for broadband services installation, including copper, ADSL 1/2/2+, IP data, VoIP, and IP video testing. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/smartclass-tps.aspx

StrataSync™

StrataSync is a hosted, cloud-based solution that provides asset, configuration, and test data management for JDSU instruments and ensures all instruments have the latest software and options installed. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/stratasync.aspx



  • Core Test

JDSU Core level field testers enable a broad set of test and measurement capabilities, from basic bit error rate (BER) tests to in-line optical monitoring (seeing both East and West directions) for SONET/SDH rings, FC, and Gigabit Ethernet (GigE) services. JDSU testers also provide end-to-end L4 Transmission Control Protocol/User Datagram Protocol (TCP/UDP) Traffic Blasting that measures throughput, loss, and delay, as well as TCP state.


40G SONET/SDH Module for T-BERD®/MTS-8000 Platforms

SONET/SDH fiber characterization, service verification, and troubleshooting with ITU-T and GR-253-compliant optics, optical power measurement, and frequency offset adjustment and measurement. http://www.jdsu.com/ProductLiterature/40gpromo_ss_tfs_tm_ae.pdf

Transport Module for T-BERD®/MTS-8000 Platforms

Combines traditional SONET/SDH and Ethernet/IP features in a single module including advanced Layer 4 and above application-centric testing, IPTV, and Fibre Channel to 10 Gbps. http://www.jdsu.com/ProductLiterature/tbmts8000_ds_tfs_tm_ae.pdf

Multi Services Application Module (MSAM) forT-BERD®/MTS-6000A/8000 Platform

Industry’s most compact 10 GigE multifunction tester for the installation and maintenance of carrier-grade Ethernet and Internet Protocol services. http://www.jdsu.com/ProductLiterature/msamv2_pb_tfs_tm_ae.pdf

ONT-100G Test Solution Supporting 40GE/100GE/OTU4

The ONT-100G solution supports testing and verification for new high-speed network elements for 40 GE and 100 GE and enables the development of 100 G products based on CFP and CFP2 technologies. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/ont-100g.aspx

ONT Ethernet

Addresses the need for evaluating fully interworking New Generation SONET/SDH with Ethernet services at electrical and optical interfaces. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/ont-ethernet.aspx

ONT NewGen EoS

The industry's first fully functional Ethernet over SONET/SDH test solution, including Virtual Concatenation with LCAS emulation, Generic Frame Procedure, and Ethernet MAC frames. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/ont-newgen.aspx

J-Complete Suite of Test Applications

J-Complete is a suite of automated test applications that simplify installation and troubleshooting of Carrier-grade networks. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/j-complete.aspx

StrataSync™

StrataSync is a hosted, cloud-based solution that provides asset, configuration, and test data management for JDSU instruments and ensures all instruments have the latest software and options installed. http://www.jdsu.com/ProductLiterature/stratasync_pb_tfs_tm_ae.pdf



  • Metro Test

JDSU offers a broad range of Metro layer testers, systems, and functionality, from traditional Layer 2/Layer 3 (L2/L3) Ethernet- and Internet Protocol (IP)-based network-centric turn-up to advanced features for Layer 4 and above application-centric testing, IPTV testing, and Fibre Channel (FC) testing up to 10 Gb/s. JDSU Metro test solutions help install and maintain SAN-related links and test to ensure that they meet service level agreements (SLAs).


40G / 100G Module for T-BERD®/MTS-8000 Platform

40G / 100G Transport Module is the most compact test solution on the market and is ideal for field-test applications with capabilities designed for carrier Ethernet/packet transport, long-haul, and metro-core networks. http://www.jdsu.com/ProductLiterature/tbmts800040100G_ds_tfs_tm_ae.pdf

40G SONET/SDH Module for T-BERD®/MTS-8000 Platforms

SONET/SDH fiber characterization, service verification, and troubleshooting with ITU-T and GR-253-compliant optics, optical power measurement, and frequency offset adjustment and measurement. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/mts-8000-40g-transport-module.aspx

J-Complete Suite of Test Applications

J-Complete is a suite of automated test applications that simplify installation and troubleshooting of Carrier-grade networks. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/j-complete.aspx

MTS-5800 Handheld Network Tester

The MTS-5800 Handheld Network Tester is the industry’s smallest 10G handheld instrument and supports testing throughout the entire service life cycle including installation, troubleshooting, and maintenance. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/mts-5800-handheld-network-tester.aspx

Multi Services Application Module (MSAM) forT-BERD®/MTS-6000A/8000 Platform

Industry’s most compact 10 GigE multifunction tester for the installation and maintenance of carrier-grade Ethernet and Internet Protocol services. http://www.jdsu.com/ProductLiterature/msamv2_pb_tfs_tm_ae.pdf

NetComplete® EtherASSURE™

Addresses the entire Ethernet Service deployment life cycle including turn-up acceptance, SLA/performance monitoring and reporting, and test and troubleshooting. http://www.jdsu.com/ProductLiterature/etherAssure_pb_tfs_tm_ae.pdf

SmartClass Ethernet

Entry-level Ethernet test solution for up to 1G electrical/optical Ethernet interfaces with VLAN, Q-in-Q tags, or MPLS labels and verification of Carrier Ethernet SLAs. http://www.jdsu.com/ProductLiterature/smclassethgige_ds_acc_tm_ae.pdf

StrataSync™

StrataSync is a hosted, cloud-based solution that provides asset, configuration, and test data management for JDSU instruments and ensures all instruments have the latest software and options installed. http://www.jdsu.com/ProductLiterature/stratasync_pb_tfs_tm_ae.pdf

T-BERD® 5800 Handheld Network Tester

This tester is the industry’s smallest 10G handheld instrument and supports testing throughout the entire service life cycle including installation, troubleshooting, and maintenance. http://www.jdsu.com/ProductLiterature/5800_pb_tfs_tm_ae.pdf

Transport Module for T-BERD®/MTS-8000 Platforms

Combines traditional SONET/SDH and Ethernet/IP features in a single module including advanced Layer 4 and above application-centric testing, IPTV, and Fibre Channel to 10 Gbps. http://www.jdsu.com/ProductLiterature/tbmts8000_ds_tfs_tm_ae.pdf

TrueSpeed™ RFC 6349 based TCP Throughput Testing

TrueSpeed is the industry’s first RFC 6349-based TCP test. A service provider can run a TCP test during the same truck-roll and with the same skill level technician in about 5 minutes. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/TrueSpeed-RFC-6349-based-TCP-Throughput-Testing.aspx

  • Premises Test

JDSU premises testing offers a wide range of capabilities that fit business class to residential requirements including simple cable identification to Ethernet speed certification. JDSU solutions are designed to optimize cabling installation for all levels of technicians, and to increase their level of knowledge of the network for optimal network performance.

Enterprise Services Application Module (ESAM) for the T-BERD®/MTS-4000 Platform

The industry’s broadest range of enterprise test capabilities in a single tester for IT organizations that maintain Ethernet/IP Local Area Networks (LANs). http://www.jdsu.com/ProductLiterature/ESAM_nt_ds_net_tm_ae.pdf

HST-3000 Handheld Services Tester

Premier triple –play access network tester installs and maintains copper and fiber based bonded ADSL/VDSL, IPTV, Microsoft TV, VoIP and data plus legacy networks. http://www.jdsu.com/ProductLiterature/hst_bro_0608.pdf

Multi Services Application Module (MSAM) forT-BERD®/MTS-6000A/8000 Platform

Industry’s most compact 10 GigE multifunction tester for the installation and maintenance of carrier-grade Ethernet and Internet Protocol services. http://www.jdsu.com/ProductLiterature/msamv2_pb_tfs_tm_ae.pdf

SmartClass Ethernet

Entry-level Ethernet test solution for up to 1G electrical/optical Ethernet interfaces with VLAN, Q-in-Q tags, or MPLS labels and verification of Carrier Ethernet SLAs. http://www.jdsu.com/ProductLiterature/smclassethgige_ds_acc_tm_ae.pdf

J-Complete Suite of Test Applications

J-Complete is a suite of automated test applications that simplify installation and troubleshooting of Carrier-grade networks. http://www.jdsu.com/en-us/Test-and-Measurement/Products/a-z-product-list/Pages/j-complete.aspx

StrataSync™

StrataSync is a hosted, cloud-based solution that provides asset, configuration, and test data management for JDSU instruments and ensures all instruments have the latest software and options installed. http://www.jdsu.com/ProductLiterature/stratasync_pb_tfs_tm_ae.pdf