ADALIL Telecom & IT Technology

Fujikura

 

 

Fusion Splicer Top

 

  • For single  fiber

Core-Alignmen(70S)

 

 

 

Core-Alignment

 

Explosive increase of data traffic by smartphone, renewal of back-bone network in accordance with the spread of FTTH (Fiber To The Home) network, and a series of new submarine cable projects in emerging countries to build basic telecom infrastructure drive the demands of fusion splicers.

The 70S is the new standard core alignment fusion splicer covering varied splicing needs in those fields with a series of innovative features, such as automated wind protector / tube heaters, 7 seconds splicing and 14 seconds tube heating, ruggedized body, improved carrying case, etc. They are all for great splicing efficiency.

http://www.fujikura.co.jp/eng/products/tele/o_f_splicers/__icsFiles/afieldfile/2013/05/14/70S.pdf

 

Cladding-Alignment Fixed v-groove (19 S)


 

Explosive increase of data traffic by smartphone, renewal of back-bone network in accordance with the spread of FTTH (Fiber To The Home) network, and a series of new submarine cable projects in emerging countries to build basic telecom infrastructure drive the demands of fusion splicers.

The 19S is the new standard cladding alignment fusion splicer (fixed V-Groove) covering varied splicing needs in those fields with a series of innovative features, such as automated wind protector / tube heaters, 9seconds splicing and 14 seconds tube heating, ruggedized body, improved carrying case, etc. They are all for great splicing efficiency.

 

 

 

Cladding-Alignment Fixed v-groove (12 S)



The revolutionary 12S compress field proven fixed v-groove and dual axis observation system into a palm size package. Weighing only 776g and low profile design with a maximum thickness of 57mm, it is truly the world's smallest and lightest splicer.

The contour is specially designed for splicing fibers in narrow space environment commonly faced by FTTH installers. The light weight is also highly suitable for aerial cable installation. Furthermore, the 12S is also equipped with powerful Li-ion battery and "Ready-to-Splice" work table to deliver superior performance and productivity in FTTx installation.

http://www.fujikura.co.jp/eng/products/tele/o_f_splicers/__icsFiles/afieldfile/2013/03/01/12S_e_1.pdf

 

For Ribbon Fiber

Ribbon Fiber Fusion Splicer 70R

 

Explosive increase of data traffic by smartphone, renewal of back-bone network in accordance with the spread of FTTH (Fiber To The Home) network, and a series of new submarine cable projects in emerging countries to build basic telecom infrastructure drive the demands of fusion splicers.

The 70R is the new standard ribbon fiber fusion splicer (up to 12 fiber ribbon) covering varied splicing needs in those fields with a series of innovative features, such as automated wind protector / tube heaters, 11seconds splicing and 18 seconds tube heating, ruggedized body, improved carrying case, etc. They are all for great splicing efficiency.


 

Ribbon Fiber Fusion Splicer 19R

 

Explosive increase of data traffic by smartphone, renewal of back-bone network in accordance with the spread of FTTH (Fiber To The Home) network, and a series of new submarine cable projects in emerging countries to build basic telecom infrastructure drive the demands of fusion splicers.

The 19R is the new standard ribbon fiber fusion splicer (up to 4 fiber ribbon) covering varied splicing needs in those fields with a series of innovative features, such as automated wind protector / tube heaters, 11seconds splicing and 18 seconds tube heating, ruggedized body, improved carrying case, etc. They are all for great splicing efficiency.

http://www.fujikura.co.jp/eng/products/tele/o_f_splicers/__icsFiles/afieldfile/2013/09/03/19R.pdf

 

Ribbon Fiber Fusion Splicer for FTTx : 12R

 

The cutting-edge 12R mass splicer compress field proven fixed v-groove and dual axis observation system for ribbon fiber into a palm size package. Weighing only 776g and low profile design with a maximum thickness of 57mm, it is truly the world's smallest and lightest ribbon splicer.

The contour is specially designed for splicing ribbon fibers in narrow space environment commonly faced by FTTH installers. The light weight is also highly suitable for aerial cable installation. Furthermore, the 12R is also equipped with powerful Li-ion battery and "Ready-to-Splice" work table to deliver superior performance and productivity in FTTx installation.

http://www.fujikura.co.jp/eng/products/tele/o_f_splicers/__icsFiles/afieldfile/2013/03/01/12r_j.pdf

 

FH-50 series

Fiber Holder

  • Necessary for mass fiber splicers and SpliceMate.
  • Several types available for fiber dimensions.

FH-60 series

 

 

 

 

Fiber Holder

  • Single fiber holder for 70S, 19S, 12S Fujikura splicers.
  • 3 types available for 250µm , 900µm coating diameter, and 900µm loose tube fiber.

 

CLAMP-60S series

  • Detachable sheath clamp for FSM-60 series.
  • 4 types available for cleave length / fiber dimensions / types.


Sheath Clamp
  • Detachable sheath clamp for 70 series.
  • 2 Types available for fiber dimensions / types.

Fiber Protection Sleeve
  • Wide variations according to fiber type and fiber cleaved length



 

  • Electrodes for Fusion Splicer
  • For generating arc discharge for fiber splicing.
  • Several types are prepared for each model of splicer.

BTR-06(S)/(L)

Detachable Batteries

  • Slot-in battery for FSM-50/17 series
  • Both standard(S) and large(L) available

 

BTR-07 / BTC-04

 

 

 

 

 

 

Detachable Batteries

  • Slot-in battery for SpliceMate(FSM-11R/S) series

 

BTR-08

 

 

Detachable Batteries

  • Slot-in battery for FSM-60/18 series

 

  • Slot-in battery for 70 series

 

BTR-10

Built-in batteries

  • Built-in battery for 12 series


AC adapters
  • To supply required DC power for splicers and accessories for HTS-12, SH-7.


AC adapters
  • To supply required DC power for splicers and accessories for SpliceMate, FSM-45PM, FSM-45F, FSR-02.

AC adapters
  • To supply required DC power for splicers and accessories for SpliceMate, FSM-45PM, FSM-45F, FSR-02.



AC adapters
  • To supply required DC power for splicers and accessories for FSM-17/50 series.


AC adapters
  • To supply required DC power for splicers and accessories for FSM-60/18series.

AC adapters
  • To supply required DC power for splicers and accessories for 70 series.

AC adapters
  • To supply required DC power for splicers for 12 series


AC power cord
  • Plug type selectable.


DC power cord
  • Cigarette lighter plug and Alligator clamp available.


Working Table
  • Attachable to splicer main body of FSM-50/17 serise.
  • Creating free space for smooth operation


Working Table
  • Used exclusively for SpliceMate
  • Portable & Foldable


Leather Case
  • Portable case for SpliceMate

J plate
  • Attachable to splicer main body of FSM-50/17 serise.
  • For temporary placing spliced fibers

JP-05
J Plat
  • Attachable to splicer main body of FSM-60/18 serise.
  • For temporary placing spliced fibers

Magnifier
  • Attachable to splicer main body of FSM-60/18 serise.
  • Attachment comes in splice protector holder.


High Precision Fiber Cleavers
  • For cleaving silica fiber up to 12 fibers
  • Blade life of 48,000 fibers
  • Fiber scrap collection-free


High Precision Single Fiber Cleaver
  • Newly add fiber scrap collector
  • Suitable for FTTH
  • Dedicated for single fiber cleaving.
  • Outstanding cost performance.

Fiber Cleaver
  • For cleaving single count silica fiber
  • Handheld design

JS-01

 

 

 

 

 

Nylon Jacket Stripper

  • For stripping 900µm diameter of Nylon jacketed single count fiber

 

PS-02

Primary Coat stripper

  • For stripping 250µm coating diameter of single count fiber
Thermal Jacket Stripper
  • For stripping fiber ribbon up to 12 fibers
  • A heater equipped for smooth stripping

Thermal Jacket Stripper
  • For stripping fiber ribbon up to 12 fibers
  • A heater equipped for smooth stripping
  • Battery operation
Optical Fiber Temporary Jointing Device
  • For arranging individual fiber to bundled fiber configuration with paste
  • Applicable up to 12 fibers bundling
Optical Fiber Temporary Jointing Device
  • Temporary jointing of fiber with manual operation.
  • Applicable single to 12-fibers according to the model

Fiber Separation Tool
  • For splitting of 12-fiber ribbon into two portion.
  • Extracting of sub-group of fibers or single fiber possible.
Alcohol Dispenser
  • For supply of alcohol for splice work
  • Bottle and pump.
Tube heater
  • SH-7 is designed for the heat-shrinkable protection sleeve.